MgB2 Superconductor: Difference between revisions
Jump to navigation
Jump to search
Created page with "== MgB2 Superconductor Project == === Preparing Samples === 1) Weigh appropriate amounts of Mg and B powders.<br> 2) Mix and grind powders (in mortar) for ~ 15 minutes.<br> 3..." |
|||
| Line 6: | Line 6: | ||
3) Pack and press the resulting powder into sheathing material.<br> | 3) Pack and press the resulting powder into sheathing material.<br> | ||
4) Mechanically deform sample (crush the core) into a slug, ribbon or wire.<br> | 4) Mechanically deform sample (crush the core) into a slug, ribbon or wire.<br> | ||
5) Heat.<br> | 5) Heat (possibly two or more temps for two or more times).<br> | ||
=== Processing Post-Reacted Samples === | |||
1) Cut off sample ends (exposing clean sample cores).<br> | |||
2) Polish sample ends.<br> | |||
Revision as of 19:56, 11 May 2018
MgB2 Superconductor Project
Preparing Samples
1) Weigh appropriate amounts of Mg and B powders.
2) Mix and grind powders (in mortar) for ~ 15 minutes.
3) Pack and press the resulting powder into sheathing material.
4) Mechanically deform sample (crush the core) into a slug, ribbon or wire.
5) Heat (possibly two or more temps for two or more times).
Processing Post-Reacted Samples
1) Cut off sample ends (exposing clean sample cores).
2) Polish sample ends.