MgB2 Superconductor: Difference between revisions
Jump to navigation
Jump to search
Line 9: | Line 9: | ||
=== Processing Post-Reacted Samples === | === Processing Post-Reacted Samples === | ||
1) Cut off sample ends (exposing clean sample cores).<br> | 1) Possibly mechanically deform again. | ||
2) Possibly sinter again. | |||
2) Cut off sample ends (exposing clean sample cores).<br> | |||
3) Polish sample ends.<br> |
Revision as of 20:24, 11 May 2018
MgB2 Superconductor Project
Preparing Samples
1) Weigh appropriate amounts of Mg and B powders.
2) Mix and grind powders (in mortar) for ~ 15 minutes.
3) Pack and press the resulting powder into sheathing material.
4) Mechanically deform sample (crush the core) into a slug, ribbon or wire.
5) Heat (possibly two or more temps for two or more times).
Processing Post-Reacted Samples
1) Possibly mechanically deform again.
2) Possibly sinter again.
2) Cut off sample ends (exposing clean sample cores).
3) Polish sample ends.